Foldfield

技术支持

开发者:辛磊 · 答复时效:3 个工作日内

leixin@me.com

写信时请附上:机型、iOS 版本、App 版本(设置页底部),以及你遇到的问题。

三步开始

  1. 确认机型 —— 设置 → 我的设备,选择「折叠屏」或「直板」,并填写购机日期。
  2. 确认标称寿命 —— 填你这款机型厂商标注的弯折次数(默认 200,000)。
  3. 正常使用 —— 开合手机即可,App 在运行时会自动计数;非折叠机请用「记录一次开合」按钮。

常见问题

为什么今天的计数比实际少?

系统只在 App 运行且界面在前台 时才把铰链状态交给 App。你在别的 App 里、锁屏时、 或 App 被系统回收后发生的开合,拿不到回调,因此不会被记录。这是 iOS 的平台限制, 我们不做后台常驻,是为了不耗你的电。想补记可以用设置页的手动记录。

我的手机不是折叠屏,能用吗?

能,但进入手动模式:折叠角靠在主界面左右拖动改变,「+ 记录一次开合」按钮手动落账。 这种模式下的数字只有演示价值,不具备预测意义 —— 因为直板机没有铰链磨损这回事。

磨损环几乎不亮,是不是没在计数?

不是。新机的磨损通常只有万分之几,环上亮起的弧段会非常短。我们特意让未磨损段保持 55% 的亮度,这样环始终是完整一圈,你能看出「量程」,而亮的那一段才是真实进度。 计数是否在走,看主界面的今日数字更直接。

「保守 / 中位 / 乐观」三个日期怎么读?

它们对应模型里的三个分位点:保守(10% 的设备已失效)、中位(50%)、 乐观(90%)。只看一个日期会被误导,区间才是这个模型真正想告诉你的东西 —— 中位那个日期,意味着一半的设备在此之前、一半在此之后。

换过屏或换过铰链,要做什么?

请在设置里把购机日期改成换屏日期,必要时调整标称寿命。换屏后内屏是新的、 铰链是旧的,两者的剩余寿命不再同步,不重新校准的话预测会明显偏离。

数据会丢吗?怎么备份?

数据只存在本机(App 沙盒内的数据库),不进 iCloud、不上传任何服务器。 卸载 App、抹掉设备、换手机会一并删除,我们这边没有副本、无法恢复。 需要留档请截图,或在换机前先把关键数字记下来。

为什么预测的日期那么远?

因为折算后的中位寿命仍在十万次量级,而你每天可能只用几十次。按每天 60 次算, 20 万次标称折算成 13.2 万次中位,就是六年以上。日期远不代表模型乐观, 它只是除法算出来的结果。想验证模型是否在动,看「已用」百分比,而不是日期。

「置信度」是干什么的?

它告诉你这个估算有多可信:样本不足三周、或大部分数据靠估算时是低; 三周以上真实数据、精确计数占比一般时是中; 样本充足且大部分来自铰链直接计数时是高。置信度低的时候, 请把日期当作方向而不是结论。

提醒什么时候会响?

打开开关时会请求通知权限,同意后由 iOS 在本机排定两条:跨过八成之后的第一个上午十点、 跨过九成之后的第一个上午十点。若同时开了到期预警,还会在预计到达校准中位寿命前 30 天再提醒一次。 全部都在本机排程,不联网。

没收到,通常是这三种情况:① 系统还没给通知权限(开关会自动弹回去,并在系统「设置 › 通知 › Foldfield」里等你打开); ② 数据还不够 —— 日均频次算不出来时不会排任何提醒;③ 目标日期还在一年以外,本 App 只排未来 13 个月内的提醒, 等它走近了会自动排上。每次打开 App 都会按最新使用频率重算一次日期。

支持哪些设备和系统?

需要 iOS 27.0 或更高版本的 iPhone。铰链自动计数依赖 iOS 27.1 才引入的 折叠设备接口,它在支持铰链的折叠机型上可用。系统低于 27.1、或机器本身没有铰链时,App 自动走手动模式 —— 拖动屏幕改变折叠角、用「记录开合」补录,统计与寿命预测照常工作,功能不受影响。 右上角会写明当前是「实时感应」还是「手动模式」,设置页的「关于 › 感应方式」也给出原因。

App 会联网或收集我的数据吗?

不会,一次网络请求都没有。详见隐私政策 —— 那里写了三种你可以自行核验的方法。


Foldfield

Support

Developer: Xin Lei · Response time: within 3 business days

leixin@me.com

Please include your device model, iOS version, app version (bottom of Settings), and what went wrong.

Getting started in three steps

  1. Set your device — Settings → My device: pick "Foldable" or "Flat" and enter the purchase date.
  2. Set the rated lifespan — enter the fold count your manufacturer rates the model for (default 200,000).
  3. Use it normally — the app counts while it is running. On a non-foldable, use "+ Log fold".

Frequently asked

Why is today's count lower than reality?

The system hands hinge state to the app only while the app is running and in the foreground. Folds made in other apps, with the screen locked, or after the app is reclaimed produce no callback, so they are not counted. That is an iOS platform limit; we avoid background residency to protect your battery. Use the manual log in Settings to fill gaps.

Can I use it on a non-foldable phone?

Yes, in manual mode: drag left or right to change the angle, and tap "+ Log fold" to record. Numbers in this mode are illustrative only — a flat phone has no hinge to wear out.

The wear ring is barely lit. Is it counting?

It is. A new device typically sits at a few hundredths of a percent, so the lit arc is tiny. We deliberately keep the unworn portion at 55% brightness so the ring always reads as a full circle — you can see the scale, and the bright segment is the real progress. For whether counting works, the number on the dashboard is clearer.

How do I read conservative / median / optimistic?

They are three quantiles of the model: conservative (10% of devices have failed), median (50%), optimistic (90%). A single date is misleading; the range is the point. The median date means half fail before it and half after.

I had the screen or hinge replaced. What now?

Change the purchase date in Settings to the replacement date and adjust the rated lifespan if needed. After a screen swap the display is new but the hinge is old; their remaining lives are no longer in sync, and the estimate will drift without recalibration.

Can I lose my data? How do I back it up?

Data lives only on this device, in the app sandbox — no iCloud, no server. Deleting the app, erasing the device, or switching phones deletes it, and we hold no copy to restore. Screenshot what matters, or note the key figures before you switch devices.

Why is the predicted date so far away?

Because the calibrated median is still in the hundreds of thousands of cycles, while you may only make dozens a day. At 60 folds a day, a 200,000 rating becomes 132,000 median cycles — more than six years. A distant date is not optimism, it is division. To check the model is moving, watch the percentage worn, not the date.

What is "confidence" for?

It tells you how much to trust the estimate: low with under three weeks of samples or mostly estimated data; medium with three-plus weeks of real data and ordinary sensor coverage; high with ample data mostly from direct hinge counts. When it is low, treat dates as direction, not conclusion.

When do reminders actually fire?

Turning a switch on asks for notification permission. Once granted, iOS schedules two local notifications at 10:00 on the first morning after you cross 80% and 90% of the calibrated median lifespan. With the expiry warning on, you also get one 30 days before the estimated median failure point. All of it is scheduled on device; nothing goes over the network.

If nothing arrives, it is usually one of three things: (1) permission was never granted — the switches flip back and wait for you in Settings › Notifications › Foldfield; (2) there isn't enough data yet, since no reminders are scheduled while the daily rate is unknown; (3) the target date is more than 13 months away — the app only schedules within that horizon and picks it up once it gets closer. Dates are recomputed on every launch.

Which devices and OS versions are supported?

iPhone on iOS 27.0 or later. Automatic hinge counting relies on the foldable-device API that arrived in iOS 27.1, and works on foldables that expose a hinge. Below 27.1, or on a device with no hinge, the app falls back to manual mode — drag to set the fold angle and use "Log fold" to record one. Counting and lifespan prediction work the same either way. The top-right corner always states which mode is active, and Settings › About › Sensing says why.

Does the app go online or collect my data?

No — not a single network request. See the privacy policy, which lists three ways you can verify that yourself.


Foldfield

サポート

開発者:辛磊 · 返信目安:3 営業日以内

leixin@me.com

機種、iOS のバージョン、App のバージョン(設定画面の下部)、問題の内容をお書き添えください。

3 ステップで開始

  1. 機種を設定 —— 設定 → マイデバイスで「フォルダブル」か「ストレート」を選び、購入日を入力。
  2. 公称寿命を設定 —— メーカーが公表している折りたたみ回数を入力(既定 200,000)。
  3. そのまま使う —— App の動作中は自動でカウントします。フォルダブルでない機種は「+ 1 回記録」で。

よくある質問

今日のカウントが実際より少ないのはなぜ?

システムがヒンジ状態を渡すのは App が動作し、画面が前面にあるとき だけです。 他の App を使用中、画面ロック中、App が回収された後の開閉はコールバックが来ず記録されません。 iOS の制約であり、バッテリーのため常駐はしません。不足分は設定の手動記録で補えます。

フォルダブルでない端末でも使えますか?

使えますが手動モードになります。角度は画面の左右ドラッグで変更し、開閉は「+ 1 回記録」で 手動登録します。このモードの数値は参考程度で、予測の意味はありません。ストレート端末にヒンジの摩耗はないためです。

摩耗リングがほとんど光りません。カウントされていない?

されています。新品の摩耗はふつう 0.0 数 % 程度なので、光る弧はごく短くなります。 未摩耗部分の明るさを 55% に保っているのは、リングが常に一周に見えるようにするためです。 計測が動いているかは、ホーム画面の今日の数字を見るほうが確実です。

「控えめ / 中央値 / 楽観」はどう読む?

モデルの 3 つの分位点です。控えめは 10% の端末が故障、中央値は 50%、 楽観は 90%。1 つの日付だけ見ると誤解します。幅で見ることが本質で、 中央値の日付は「その前後で半々になる」という意味です。

画面やヒンジを交換しました。何をすれば?

設定で購入日を交換日に変更し、必要なら公称寿命も調整してください。 画面交換後は表示部が新しくヒンジは旧いため、残り寿命が同期しません。再校正しないと推定がずれます。

データは消えますか?バックアップは?

データは本機の App サンドボックス内だけにあり、iCloud にもサーバーにも送りません。 App の削除、端末の消去、機種変更で失われ、当方に控えはなく復元できません。 必要な数値はスクリーンショットなどで保管してください。

予測日が遠すぎるのはなぜ?

補正後の中位寿命が依然として 10 万回規模で、1 日の使用が数十回だからです。 1 日 60 回なら公称 20 万回は中位 13.2 万回、6 年以上になります。日付が遠いのは楽観ではなく、 単なる割り算の結果です。モデルが動いているかは「使用済み %」で確認してください。

「信頼度」とは?

推定の信頼度です。サンプルが 3 週間未満、または推定値が多い場合は低。 3 週間以上の実データがありセンサー比率が普通なら中。 データが十分で大半がヒンジ実測なら高。低いときは日付を結論ではなく方向として扱ってください。

リマインダーはいつ通知されますか。

スイッチをオンにすると通知の許可を求めます。許可すると iOS が端末内に 2 件予約します。校正済み中央値寿命の 八割を超えた翌日の午前 10 時と、九割を超えたあとの最初の午前 10 時です。期限前の警告もオンにしていれば、 推定中央値故障日の 30 日前にもう 1 件通知します。すべて端末内で予約され、通信は行いません。

届かない場合は主に 3 つです。① 通知が許可されていない(スイッチは自動で戻り、システムの「設定 › 通知 › Foldfield」で 待機します)。② データが足りない( 1 日の平均回数が算出できないうちは予約しません)。③ 対象日が 13 か月より先 (本 App は 13 か月以内のみ予約し、近づくと自動で予約します)。日付は起動のたびに再計算されます。

対応端末と OS は?

iOS 27.0 以上の iPhone が必要です。ヒンジの自動カウントは iOS 27.1 で 導入された折りたたみ端末向け API に依存し、ヒンジを備えたフォルダブルで動作します。27.1 未満、または ヒンジのない機種では手動モードに切り替わります。画面をドラッグして角度を変え、「開閉を記録」で 1 回を 追加できます。カウントと寿命予測はどちらのモードでも同じように動きます。右上に現在のモードが表示され、 設定 › この App について › 検出方式 に理由が出ます。

通信やデータ収集はありますか?

ありません。ネットワーク通信は一度も行いません。詳細はプライバシーポリシーをご覧ください。


Foldfield

Soporte

Desarrollador: Xin Lei · Respuesta: en 3 días hábiles

leixin@me.com

Incluye el modelo del dispositivo, la versión de iOS, la versión de la app (abajo en Ajustes) y qué ocurrió.

Empezar en tres pasos

  1. Configura tu dispositivo — Ajustes → Mi dispositivo: elige «Plegable» o «Plano» e introduce la fecha de compra.
  2. Configura la vida útil nominal — introduce el número de plegados que declara el fabricante (por defecto 200.000).
  3. Úsalo con normalidad — la app cuenta mientras está abierta. En un dispositivo no plegable, usa «+ Registrar plegado».

Preguntas frecuentes

¿Por qué el conteo de hoy es menor que la realidad?

El sistema entrega el estado de la bisagra solo mientras la app se ejecuta y está en primer plano. Los plegados hechos en otras apps, con la pantalla bloqueada o tras cerrar la app no generan llamada y no se cuentan. Es una limitación de iOS; evitamos la residencia en segundo plano para cuidar tu batería. Puedes rellenar huecos con el registro manual de Ajustes.

¿Funciona en un teléfono no plegable?

Sí, en modo manual: arrastra a izquierda o derecha para cambiar el ángulo y pulsa «+ Registrar plegado». En ese modo las cifras son ilustrativas: un teléfono plano no tiene bisagra que desgastar.

El anillo de desgaste apenas se ilumina. ¿Está contando?

Sí. Un dispositivo nuevo suele estar en centésimas de punto porcentual, así que el arco iluminado es mínimo. Mantenemos la parte no desgastada al 55 % de brillo para que el anillo se lea siempre como un círculo completo: ves la escala, y el segmento brillante es el progreso real. Para saber si cuenta, el número del panel es más claro.

¿Cómo leo conservador / mediana / optimista?

Son tres cuantiles del modelo: conservador (10 % de dispositivos fallidos), mediana (50 %), optimista (90 %). Una sola fecha engaña; el rango es el mensaje. La fecha mediana significa que la mitad falla antes y la mitad después.

Me han cambiado la pantalla o la bisagra. ¿Y ahora?

Cambia la fecha de compra en Ajustes por la de sustitución y ajusta la vida útil nominal si hace falta. Tras un cambio de pantalla la parte visible es nueva pero la bisagra es vieja; sus vidas restantes ya no están sincronizadas y la estimación se desviará sin recalibrar.

¿Puedo perder los datos? ¿Cómo los respaldo?

Los datos solo están en este dispositivo, en el sandbox de la app: sin iCloud y sin servidor. Borrar la app, restablecer el dispositivo o cambiar de teléfono los elimina, y no tenemos copia para restaurar. Haz capturas de lo que importe o anota las cifras clave antes de cambiar de dispositivo.

¿Por qué la fecha prevista está tan lejos?

Porque la mediana calibrada sigue en cientos de miles de ciclos, mientras que quizá hagas decenas al día. A 60 plegados diarios, una calificación de 200.000 pasa a 132.000 ciclos medianos: más de seis años. Una fecha lejana no es optimismo, es una división. Para comprobar que el modelo avanza, mira el porcentaje usado.

¿Para qué sirve la «confianza»?

Indica cuánto fiarse de la estimación: baja con menos de tres semanas de muestras o datos mayormente estimados; media con tres semanas o más de datos reales y cobertura normal del sensor; alta con datos abundantes y en su mayoría conteos directos de la bisagra. Cuando es baja, trata las fechas como dirección, no como conclusión.

¿Cuándo se envían los recordatorios?

Al activar un interruptor se solicita permiso de notificaciones. Una vez concedido, iOS programa dos avisos locales: a las 10:00 de la primera mañana tras superar el 80 % y el 90 % de la vida mediana calibrada. Con el aviso de vencimiento activo se añade otro 30 días antes del punto medio estimado de fallo. Todo se programa en el dispositivo; no sale nada por la red.

Si no llega nada, suele ser por una de tres razones: (1) no se concedió el permiso — los interruptores vuelven a su sitio y esperan en Ajustes › Notificaciones › Foldfield; (2) aún no hay datos suficientes, ya que no se programa nada mientras se desconoce el ritmo diario; (3) la fecha objetivo está a más de 13 meses — la app solo programa dentro de ese horizonte y lo hará cuando se acerque. Las fechas se recalculan en cada inicio.

¿Qué dispositivos y versiones se admiten?

Requiere un iPhone con iOS 27.0 o posterior. El conteo automático de la bisagra depende de la API para dispositivos plegables introducida en iOS 27.1 y funciona en plegables con bisagra. Por debajo de 27.1, o en un dispositivo sin bisagra, la app pasa a modo manual: arrastra para fijar el ángulo y usa «Registrar pliegue» para anotar uno. El conteo y la predicción de vida útil funcionan igual en ambos modos. La esquina superior derecha indica el modo activo y Ajustes › Acerca de › Detección explica el motivo.

¿La app se conecta o recopila mis datos?

No: ni una sola petición de red. Consulta la política de privacidad, que enumera tres formas de verificarlo por tu cuenta.


Foldfield

지원

개발자: 신레이(辛磊) · 답변: 영업일 3일 이내

leixin@me.com

기기 모델, iOS 버전, 앱 버전(설정 화면 하단), 문제 상황을 함께 적어 주세요.

세 단계로 시작

  1. 기기 설정 — 설정 → 내 기기에서 '폴더블' 또는 '일반'을 선택하고 구매일을 입력합니다.
  2. 공칭 수명 설정 — 제조사가 표시한 접힘 횟수를 입력합니다(기본 200,000).
  3. 평소대로 사용 — 앱이 실행 중일 때 자동으로 카운트합니다. 폴더블이 아니면 '+ 1회 기록'을 사용하세요.

자주 묻는 질문

오늘 카운트가 실제보다 적은 이유는?

시스템은 앱이 실행 중이고 화면이 앞에 있을 때만 힌지 상태를 전달합니다. 다른 앱을 쓰거나 화면이 잠겨 있거나 앱이 정리된 뒤의 개폐는 콜백이 오지 않아 기록되지 않습니다. iOS 플랫폼 제약이며, 배터리를 위해 백그라운드 상주를 하지 않습니다. 설정의 수동 기록으로 보완할 수 있습니다.

폴더블이 아닌 기기에서도 쓸 수 있나요?

가능하지만 수동 모드가 됩니다. 각도는 화면을 좌우로 드래그해 바꾸고, 개폐는 '+ 1회 기록'으로 직접 남깁니다. 이 모드의 수치는 참고용이며 예측 의미는 없습니다. 일반 폰에는 마모될 힌지가 없기 때문입니다.

마모 링이 거의 빛나지 않습니다. 카운트가 안 되는 건가요?

되고 있습니다. 새 기기의 마모는 보통 0.0몇 % 수준이라 빛나는 호가 아주 짧습니다. 마모되지 않은 구간을 55% 밝기로 유지하는 것은 링이 항상 한 바퀴로 보이게 하기 위해서입니다. 측정이 움직이는지는 홈 화면의 오늘 숫자로 확인하는 편이 확실합니다.

'보수적 / 중앙값 / 낙관적'은 어떻게 읽나요?

모델의 세 분위수입니다. 보수적은 10% 기기 고장, 중앙값은 50%, 낙관적은 90%입니다. 날짜 하나만 보면 오해합니다. 범위가 핵심이며, 중앙값 날짜는 그 전후로 절반씩 갈린다는 뜻입니다.

화면이나 힌지를 교체했습니다. 무엇을 해야 하나요?

설정에서 구매일을 교체일로 바꾸고 필요하면 공칭 수명도 조정하세요. 화면 교체 후에는 표시부는 새것, 힌지는 헌것이라 남은 수명이 더 이상 동기화되지 않습니다. 재보정하지 않으면 추정이 어긋납니다.

데이터를 잃을 수 있나요? 백업은?

데이터는 이 기기의 앱 샌드박스에만 있으며 iCloud에도 서버에도 전송되지 않습니다. 앱 삭제, 기기 초기화, 기기 교체 시 사라지고 저희에게 사본이 없어 복구할 수 없습니다. 필요한 수치는 스크린샷 등으로 보관하세요.

예측 날짜가 너무 먼 이유는?

보정된 중앙 수명이 여전히 수십만 회 규모인데 하루 사용은 수십 회이기 때문입니다. 하루 60회라면 공칭 20만 회는 중앙 13.2만 회, 6년 이상입니다. 날짜가 먼 것은 낙관이 아니라 나눗셈의 결과입니다. 모델이 움직이는지는 '사용 %'로 확인하세요.

'신뢰도'는 무엇인가요?

추정을 얼마나 믿을지 알려줍니다. 표본이 3주 미만이거나 추정치가 많으면 낮음, 3주 이상 실데이터에 센서 비율이 보통이면 중간, 데이터가 충분하고 대부분 힌지 실측이면 높음입니다. 낮을 때는 날짜를 결론이 아니라 방향으로 다루세요.

알림은 언제 오나요?

스위치를 켜면 알림 권한을 요청합니다. 허용하면 iOS가 기기 안에 두 건을 예약합니다. 보정된 중앙 수명의 80%를 넘은 뒤 첫 오전 10시와 90%를 넘은 뒤 첫 오전 10시입니다. 만료 경고를 함께 켜 두면 예상 중앙 고장 시점 30일 전에 한 번 더 알립니다. 모두 기기 안에서 예약되며 네트워크를 쓰지 않습니다.

알림이 오지 않는다면 보통 세 가지입니다. ① 알림 권한이 없음 — 스위치가 자동으로 되돌아가고 시스템 설정 › 알림 › Foldfield에서 기다립니다. ② 데이터가 부족함 — 하루 평균 횟수를 계산할 수 없으면 예약하지 않습니다. ③ 대상 날짜가 13개월보다 멂 — 이 앱은 13개월 이내만 예약하며, 가까워지면 자동으로 예약합니다. 날짜는 실행할 때마다 다시 계산됩니다.

지원 기기와 OS는?

iOS 27.0 이상 iPhone이 필요합니다. 힌지 자동 카운트는 iOS 27.1에서 도입된 폴더블 기기 API에 의존하며, 힌지가 있는 폴더블에서 동작합니다. 27.1 미만이거나 힌지가 없는 기기에서는 수동 모드로 전환됩니다. 화면을 드래그해 각도를 바꾸고 「개폐 기록」으로 한 번을 추가할 수 있습니다. 카운트와 수명 예측은 두 모드에서 동일하게 동작합니다. 오른쪽 위에 현재 모드가 표시되고, 설정 › 앱 정보 › 감지 방식에 이유가 나옵니다.

앱이 네트워크에 접속하거나 데이터를 수집하나요?

아니요. 네트워크 요청은 단 한 번도 없습니다. 자세한 내용은 개인정보 처리방침을 참고하세요.